Frames and Accessories
Rigid Frames
THIS PAGE IS UNDER CONSTRUCTION
Obsession Rigid Frames
New
!!!!
Curved
Dagger 300 & 330mm
Obsession Frames
NSC 23161 Rigid
Right Side Drive single down tube frame for 300 / 330 width tires with 38° rake
2" stretch and 5" backbone stretch, comes with component kit including 1"
diameter axle. $2,403.75
NSC 23196 Rigid
Right Side Drive single down tube frame for 300 / 330 width tires with 40° rake
2" stretch and 5" backbone stretch, comes with component kit including 1"
diameter axle. $2,428.90
NSC 23162 Rigid
Right Side Drive single down tube frame for 300 / 330 width tires with 40° rake
4" stretch and 6.5"
backbone
stretch, comes with component kit including 1" diameter axle.
$2,876.50
NSC23163 Rigid
Right Side Drive single down tube frame for 300 / 330 width tires with 40° rake
8" stretch and 8.5"
backbone
stretch, comes with component kit including 1" diameter axle.
$2,965.25
230/240 & 250mm Rear Tire
Designed for 230/240 width tires using a
1-1/2" belt or 250 tire with a 1-1/8" belt (or chain)
* These frames have the offset built into
them...use a 1" spacer between the engine
and
inner primary cover, and an additional 1" of spacing on the engine sprocket or
pulley
* To provide unit construction strength
and best possible driveline alignment,
all
of these models have our welded-in, 1-piece transmission plate
* Includes 1" axle and fork cup kit
NSC
23116 1-3/8" TUBING
/ 38º RAKE / 4" STRETCH / 1" BACKBONE STRETCH
INCLUDES
1" AXLE KIT & FORK CUP KIT $1,735.11
NSC
23028 1-3/8"
TUBING / 38º RAKE / 8" STRETCH / 4" BACKBONE STRETCH INCLUDES
1" AXLE KIT & FORK CUP KIT $1,907.55
1-3/8"
RIGID FRAMES w/OPTIONAL HIDDEN AXLE
* We now offer 1-3/8" rigid
frames with our newly designed hidden axle carriers
* The axle plates have been
engineered to accept the axle in such a manner as to virtually eliminate
any
unnecessary creeping under high horsepower loads
* To keep all of this concealed
we include a set of high quality, polished stainless cover plates
complete
with mounting hardware
TO
ORDER ANY 1-3/8" MEGA-TUBE RIGID FRAME WITH "HIDDEN AXLE"
CARRIERS,
SIMPLY ADD THE LETTER "H" AFTER THE PART NUMBER
 
Softail Style Frames
THIS PAGE IS UNDER CONSTRUCTION
Obsession Softail Style Frames
New
!!!!
Curved
Dagger 280mm
Obsession Frames
NSC 23152
38º
RAKE/ 2" STRETCH/ 5" B/BONE STRETCH $2,891.75
NSC 23153
40º
RAKE/ 4" STRETCH/ 6-1/2" B/BONE STRETCH $
3,369.00
NSC 23154
40º
RAKE/ 8" STRETCH/ 8-1/2" B/BONE STRETCH
$ 3,457.75
New
!!!!
Curved
Dagger 300 & 330mm
Obsession Frames
NSC
23193
40º
RAKE/ 2" STRETCH/ 5" B/BONE STRETCH $2,980.96
NSC
23156 40º
RAKE/ 4" STRETCH/ 6-1/2" B/BONE STRETCH $3,369.00
NSC
23157 40º
RAKE/ 8" STRETCH/ 8-1/2" B/BONE STRETCH $3,457.75
NSC
23139 SINGLE
DOWN TUBE . . 230/240/250 TIRE/1-3/8" TUBING/ 38º RAKE/ 2" STRETCH/ 5"
B/BONE STRETCH $2,518.00
NSC
23137
SINGLE
DOWN TUBE . .230/240/250 TIRE/1-3/8" TUBING/ 40º RAKE/ 4" STRETCH/ 6-1/2"
B/BONE STRETCH $2,662.00
NSC
23149 SINGLE
DOWN TUBE . .230/240/250 TIRE/1-3/8" TUBING/ 40º RAKE/ 8" STRETCH/ 8-1/2"
B/BONE STRETCH $2,995.60
Bobber Frames
THIS PAGE IS UNDER CONSTRUCTION
''Chi-Town Hustler'' Bobber Frames
Frames use stock width disc brake wheels,
pre 2000 Softail-style brakes, axles, spacers and adjusters. Frames are
designed for a removable
transmission plate (not included) and chain drive 4 or 5 speed transmissions.
NSC 23072 Stock
width Rigid frame made from 1-1/4" tubing with 30° rake and 0"
stretch. $773.25
NSC 23073 Stock
width Rigid frame made from 1-1/4" tubing with 34° rake and 2"
stretch. $819.50
NSC 23074 Rigid
frame for 180 width tires made from 1-1/4" tubing with 30° rake and 0"
stretch. Comes with component and axle kit. $912.50
NSC 23075 Rigid
frame for 180 width tires made from 1-1/4" tubing with 34° rake and 2"
stretch. Comes with component and axle kit. $962.50
NSC 23076 Rigid
frame for 180 width tires made from 1-1/4" tubing with 38° rake and 2"
stretch. Comes with component and axle kit.
$989.50
New
200mm Rear Tire ''Chi -Town Hustler'' Frame!!!!
NSC 23004 Rigid
frame for 200 width tires made from 1-1/4" tubing with 34° rake, 4" stretch
and 1-1/2" backbone stretch.
Comes with component kit, axle and fork cup kit. $1,147.25
Accessories
THIS PAGE IS UNDER CONSTRUCTION
Frame, Swingarms,& Accessories
Black, Sweet-Ness
250 Swingarm Kit
Swingarm kits
bolt on to your Softail without any modifications to your chassis. Complete kits
include: swingarm, axle, axle covers, primary spacers, stainless steel splash
guard, offset engine sprocket, axle adjusters, gaskets and all necessary
hardware., accepts Ness-Tech Jet-Eye or Rad II taillight and license plate side
mount. NSC 19-120 $2,699.95
Chrome,
Sweet-Ness 250 Swingarm Kit
Swingarm kit bolts on
to your stock Softail without any modifications to your chassis. Complete kit
includes: swingarm, axle, axle covers, primary spacers, stainless steel splash
guard, offset engine sprocket, axle adjusters, gaskets and all necessary
hardware. Accepts Ness-Tech Jet-Eye or Rad II taillight and license plate side
mount.
NSC 19-121$2,999.95
Fat-Batt
Swingarm Kit, Twin Cam, black
These complete
kits enable you to mount up to a 250 MM tire on a stock Softail frame without
any modifications to your chassis. Twin cam kits include swingarm, 1"
longer transmission mainshaft, starter shaft, clutch pushrod, inner primary
spacers, rear axle, axle spacers, stainless steel belt guard, stainless steel
splash guard, offset engine sprocket and more. Swingarms are available with
factory style axle plates or custom hidden axle style. Available in double black
powder coating or polished chrome plated finish. Chrome-plated billet fender
struts are available separately. Note: Factory caliper bracket may need to be
slightly modified. NSC 19-709$2,729.95
Fat-Batt Swingarm Kit, Twin Cam, chrome
These complete
kits enable you to mount up to a 250 MM tire on a stock Softail frame without
any modifications to your chassis. Twin cam kits include swingarm, 1"
longer transmission mainshaft, starter shaft, clutch pushrod, inner primary
spacers, rear axle, axle spacers, stainless steel belt guard, stainless steel
splash guard, offset engine sprocket and more. Note: Factory caliper bracket may
need to be slightly modified. NSC19-719$3,044.95
200MM Fat Tire Kit
1996-2001 FLH Models (Black Swingarm / Black Wrinkle Spacers)
Fits 1996-2001
FLH Models ( requires 1 1/8" belt), Swingarm Powder coated black with
bearings installed, Transmission Offset Kit with Black Wrinkle Spacers, Rear
Fender, 200/50R18 Metzeler Tire or 200x55x17 Dunlop Tire, Rear Axle, Spacers,
Brackets, Gaskets, and Hardware.NSCFBI200BLK-E$3,395.00
200MM Fat Tire Kit
2001-Later FLH Models (Black Swingarm / Black Wrinkle Spacers)
Fits 2002 and
later FLH models (requires 1 1/8" belt) Swingarm powder coated black with
bearing installed, Transmission Offset Kit with black wrinkle spacers, Rear
Fender, 200/50R18 Metezler Tire or 200x55x17 Dunlop Tire, Rear Axle, Spacers,
Brackets, Gaskets, and Hardware. NSCFBI200BLK-L$3,595.00
Wide Swing
Arm
  
 
Fitting and spacing
curved strut set NSC 50-0583 to stock ST style frame to use
11" fender 51-0705 swing arm, 280 x
18 Metzler and GMA Brake Pulley Combo
(23-4537) that allows use of 1.5"
belt. "280" Wheel
Assembly NSC 52-0725
1991-99 ST Wide Right Side Drive
Swing Arm in
conjunction with parts listed
allows use of 280-300 rear tire with
a 1.5" belt. Swing arm is 2" longer than
stock ST tail section includes adjuster
and 1" axle.
NSC 51-0705 Wide
Swing Arm $460.39
NSC 20-0375 70
T Pulley $228.43
NSC 50-0242 Strutless
Fender $324.19
NSC 31-0879 Fender
Tabs $39.82
NSC 20-0531 Belt,
1.5 x 136T $150.00
NSC 51-0633 Weld
On Caliper Mount $45.27
2000-up ST Rear
Swing Arm
For 2000-05 FXST and
2000-up FLST
NSC 51-0978 48442-00
Chrome $460.39
NSC 51-0974 48442-00
Chrome (OE) $626.46
For 2006-up FXST
NSC 51-0979 48607-06
Chrome (OE) $626.58
NSC 44-0588 Pivot
Kit Zinc $117.50
2000-up Chrome ST
Pivot Assembly
includes shaft, nut
and spacers .NSC 44-0726
$66.50
Chrome Rear Swing
Arm & Shock
Assy.
Chrome Rear Swing
Arm and Shock Assembly fits
ST models includes chrome
tail section, adjustable shocks with 1"
lowering capability, chrome axis tube with tapered allen screws
and chrome shock mount bolts.
NSC 51-0651 1989-99
$620.13
NSC 51-0652 2000-05
$687.38
1987-99 ST Rear
Swing Arm
NSC 51-0964 47573-89B
Black 1989-99 $407.86
NSC 51-0969 49231-97
Chrome 1989-99 $460.39
NSC 44-0585 Pivot
Kit Chrome 1987-99 $115.23
Chrome 1987-99
FXST-FLST Rear Pivot Kit. Order
hardware separately.
NSC 44-0585 A,
B, C, D Kit Kit $115.23
NSC 44-0584 A
9076 Bearing Kit, 4-pc
$58.17
NSC 12-9910 11156
Snap Rings, 10 pk $17.94
NSC 37-8824 B
4961 Tapered Allens, pr
$30.85
NSC 54-0438 7142
Lockwasher for Above $8.98
NSC 37-8896 C
43283 Washers, pr $8.98
NSC 44-2000 D
48031-89A Axis Tube, Chrome
$46.62
Chrome ST Rear Frame
Covers
bolt on to cover
axle adjuster area on all softail
frames 1986-99. Hardware and
instructions included.
NSC 42-0034 $83.17
Chrome Swing Arms
for 2000-up Dyna.
 
NSC 51-0934 2000-05
$384.46
NSC 51-0980 2006-up
$389.19
1973-85 FX-FL
Swing Arms
are available for
Chain & Belt Drives
51-0908 has shock mounts welded 3/4" back for 11/4" lowering. Bearings
not included. For use with banana style caliper only.
NSC 51-0907 47500-73
Chain Chrome $117.50
NSC 51-0898 47500-73
Chain Black $132.21
NSC 51-2149 -
Belt Chrome $283.65
NSC 51-0908 11/4"
Lower Chain Chrome $171.29
1958-86 BT Swing
Arm Pivot Kit.
NSC 44-1958 1958-72
FL-FLH $49.83
NSC 44-1973 1973-85
FX-FL-FXWG-FXE-FXS $49.83
NSC 44-1995 1973-85
Includes Special Pin $74.83
NSC 44-1996 1958-85
Special Pin Only $54.83
NSC 44-1974 1985-86
FXWG-FXE-FXB $49.83
Swing Arm
Mounting Kit
includes 2 bushing
assemblies, 2 spacers, 2 plastic
retainer rings, 2 rubber
isolators and pivot shaft with
locknut. Includes all parts required to mount
transmission and swing arm to pivot block.
Will work with stock or aftermarket rubber
mount swing arm frames. Fits 1982- 2001
FXR/FLT.
NSC 44-2044 1982-01
$221.29
NSC 44-2055 2002-up
N/A
Offset Motor
Flange Spacer
 
machined of
Billet Aluminum.
NSC 19-0568 1/4"
$61.50
NSC 19-0604 7/16"
$127.90
NSC 19-0561 1/2"
$57.50
NSC 19-0569 3/4"
$74.83
NSC 19-0570 1"
$74.83
NSC 19-0600 1
1/4" $80.00
NSC 19-0601 1
1/2" $92.31
NSC 19-0602 1
3/4" $113.08
NSC 19-0603 2"
$127.94
1970-84 BT 1/4"
Offset Kit
includes trans
plate, motor primary spacer, sprocket
spacer and compensator sprocket
extension will allow use of 160 Series
Tire on chain drive models only.
NSC 51-0660
$242.71
Offset
Transmission Plates
fit 5 or 6 speed
ST transmissions
NSC 19-0565 1/4"
$66.50
NSC 19-0560 1/2"
$58.17
NSC 19-0566 3/4"
$66.50
NSC 19-0567 1"
$66.50
NSC 19-0650 1
1/4" $46.58
NSC 19-0651 1
1/2" $46.58
NSC 19-0652 1
3/4" $48.25
NSC 19-0653 2"
$52.50
|
