Sprung Seat Front Pivot - $32.99
Seat Pan Bungs $5.99ea
1" O.D. cold rolled steel,.400" long -Tapped to 3/8x16
Seat Spring Perch w/ 1" cope - $26.99 or Seat Spring Perch w/ 1.25" cope - $26.99
Oil Tank Kit w/ STEEL BUNGS - $36.99 , w/ ALUMINUM BUNGS - $42.99 , w/ STAINLESS STEEL BUNGS - $46.99
1/8 NPT fittings for your oil lines (feed, vent, and return), it also contains a threaded filler cap and bung.
Oil Filler Cap and Bung Kit w/ STEEL BUNG - $24.99 , w/ ALUMINUM BUNG - $28.99 , w/ STAINLESS STEEL BUNG - $31.99
Fender Strut Kit comes with a pair of either curved (10" Radius), or straight - 1/2" x 19" long solid round bar stock for the uprights, 2 counter bored bungs, 2 threaded bungs and four 5/16" allens.
Straight Kit - $32.99 or Curved Kit - $36.99
Curved Motor Mount Kit : Made for SAE head bolt sizes 3/8" and 7/16". Kit contains counter bored bungs to bolt to the heads, two pieces of curved 5/8" solid round stock, a round blind threaded bung
Pan/Shovel (7/16") Kit - $30.99 or EVO/Twin Cam (3/8") Kit - $30.99
Straight Motor Mount Kit : 1/2" dia straight spanners and all hardware included
Pan/Shovel (7/16") Kit - $24.99 or EVO/Twin Cam (3/8") Kit - $24.99
"Frisco Style" T-Bar Kit : Pre bent 1" x .120 wall mild steel tubing 27" wide,2 pre coped uprights 10" long,2 weld in bungs tapered to accept 1/2" fine thread hardware.
Weld Together "Frisco Style" T-bar Kit - $78.99
Weld-In-Bungs : 1" Weld-in Riser Bungs - $13.99 or 1.25" Weld-in Riser Bungs - $15.99
Gas Tank Bung Kit : Kit gives you the pieces needed to relocate your petcock, and add a crossover. Includes two 1/8" NPT bungs for crossovers, and one 3/8" npt for a petcock - $14.99
Uni Mount Kit : 2 counter bored bungs, 2 blind tapped bungs, 2 allen bolts, sold in sizes of either 5/16" or 3/8". 5/16" - $16.99 or 3/8" - $16.99
Uni-Low-Pro-Mount Kit : 2ea Threaded bung tapped to 5/16x18 that is .400" tall, 2ea Countersunk bung that is .350" tall, 2ea taper head bolt, bolted together the set measures .750" (or 3/4") overall with an O.D. of 3/4". -$19.99
"Frisco Style" T-Bars : 1" or 1 1/4" Diameter,8", 11", or 14" Height, 7" Pullback, 29" Width, Permit use of factory controls,1 1/4 are stepped down to 1" to fit all controls and housings. 1" Bars - $192.99 or 1 1/4" Bars - $246.99
Speedo/Tach Mount Add On - $12.99